DASHPROJECTS Skids
The ready-to-operate solution for specific tasks.
Do you need a turnkey pump skid or chemical injection skid? Look no further than DASHPROJECTS We offer a comprehensive
COLUMNS AND TOWERS (INCLUDING “U” / “U2” STAMPED VESSELS)
Include all types of Columns and Towers including those with ASME “U / U2” Stamp Certification.
Our expertise includes :
- Plasma Cutting Machines
- In-house rolling capability up to 135 mm
- Have 5 nos. of rolling Machines (135 mm, 70mm, 55mm, 20mm, 10mm)
- Huge quantity of welding Machines, rotators & Idlers
- In-house Radiography bunker
- In-house PWHT Ovens
- Water Front Yard available for fabrication and assembly of very large equipments
Our scope includes :
- Design (ASME SEC VIII Div 1 & 2, PD5500 etc) & Detailed Engineering
- Preparation of Fabrication Drawings
- Procurement of Materials
- Rolling of Shells and Forming of Dish Ends,
- Welding as per ASME Sec IX using qualified welders
- Complete Fabrication at our works
- Post Weld heat treatment (If required)
- Hydro test, All other Non Destructive Tests,
- Pickling & Passivation, Painting as per project Specification
- Fit up of all internals (if required)
- Complete QA/QC Documentation and as-built drawings
- ASME U or U2 Stamping, CE Marking, GOST R Certification, ARH Documentation etc as required
220 MT SS 316L Clad Sour Water Stripper for KNPC Refinery Project
SS 316L Clad Sour Water Stripper for KNPC Refinery Project
Amine Absorbers ready for dispatch for KNPC Refinery Project
52 m TL-TL SS 304L Demethanizer for 200 MMSCFD Cryo Unit in USA
55 mm thick SS 316L Demethanizer being loaded on to ship for 200 MMSCFD Cryo Unit in USA
SS 316L Demethanizer getting ready for dispatch for 200 MMSCFD Cryo Unit in USA
Demethanizer on way to Project Site in USA (1)
Demethanizer on way to Project Site in USA (2)
Demethanizer under erection at Project Site in USA (1)
Demethanizer under erection at Project Site in USA (2)
SABIC KEMYA - Column under dispatch to Saudi Arabia
SABIC KEMYA - Hexane Recovery Tower
SABIC KEMYA - Process Columns ready for dispatch
SABIC KEMYA - Process Columns Under Fabrication
Process Column under erection in Petrochemical Plant
Process Columns installed at Kharyaga III Project in Russia
TOTAL - Kharyaga III, Russia
SABIC/Kemya Project
SABIC/Kemya Project
SABIC/Kemya Project
SABIC/Kemya Project
SABIC/Kemya Project
SABIC/Kemya Project
SABIC/Kemya Project
UHDE – Ibn Zahr C4 Feed Purification Project
UHDE – Ibn Zahr C4 Feed Purification Project
OUR SERVICES
Design, Engineering, Fabrication, Installation of Structural Steel, Piping, Pressure Vessels & Skid Packages.Constructional & Engineering
Include all types of Pressure Vessels and Reactors including those with ASME “U / U2” Stamp Certification, in Horizontal / Vertical Design.
Our expertise includes :
Plasma Cutting
We can supply the following types of Heat Exchangers in Horizontal / Vertical design :
SHELL & TUBE
COAXIAL TUBES
FLOATING HEAD TUBE SHEET
FIXED TUBE SHEETS
KETTLE TYPE RE-BOILER
U-
Our expertise include :
Shop Fabricated Tanks : All Types
Flat bottom / Sloping Bottom with Conical Roof / Flat Roof
Silos & Hoppers
Rectangular Tanks
Our scope includes :
Design
Our expertise includes :
In house semi-automatic pipe Spool Fabrication Line capable of producing 1000 Inch Dia. / Day (of average 6 Inch size)
Large Area available for storing of Raw materials
Fabrication and Assembly of all Types of Skid Packages and Modules including:
Separators Skids & other Skidded Equipment
Fuel Gas Conditioning Skids
Filtration Skids
Gas Refrigeration
As a mechanical contractor for Large Diameter Tanks our expertise includes :
Fixed Conical Roof
Fixed Aluminum Dome with Internal Floating Roof (IFR)
External Floating Roof
Our scope
Offshore Structures include:
Piles
Jackets
Decks
Flare Trestles
Bridges
Top Sides
Pipe Racks
Offshore Process Platform
Auxiliary Structures
Our scope includes :
Detailed
Design, Detailed Engineering, Procurement of Material, Fabrication, Testing, Supply of the following :
Pressure Vessels & Reactors (ASME“U & U2” Stamped)
Columns &
Design, Detailed Engineering, Procurement of Material, Fabrication, Testing, Supply of the following :
Evaporator Modules – MED / MSF
Tank Farms as per API 650 & Shop
Design, Detailed Engineering, Procurement of Material, Fabrication, Testing, Supply of the following :
Jackets & Piles
Decks
Flare Trestles
Bridges
Top Sides
Pipe Racks Modules
Process
Generally comprises of the following,
TANK PACKAGE
MECHANICAL PIPING PACKAGE
CIVIL WORKS INCLUDING MEP
ELECTRICAL PACKAGE
INSTRUMENTATION AND CONTROL PACKAGE
FIRE FIGHTING PACKAGE
HEATING
Design, Detailed Engineering Procurement of Materials, Fabrication, Supply, Erection at Site and Testing of
Large Diameter Tanks with
External Floating Roofs
Internal Floating Deck with
The Mechanical Piping work includes the following: Spool Fabrication & erection at Site, Including fabrication of Pipe Supports / Racks, erection of Pumps, Valves etc. generally for
Heavy
The civil works include the following:
Field survey.
General excavations, backfilling and site preparation works, including compaction,testing, shoring and dewatering.
Execution of all civil
The Electrical works include the followings:
Medium voltage switchgear.
Power transformers.
Emergency power switchgears.
Medium voltage distribution feeders.
400V low voltage switchboard.
The Instrumentation and Control works include the followings:
Products Distribution MOV Control System.
Fire Detection and Alarm System.
Firefighting Water and Foam Deluge Valves Control
The Firefighting works include the followings:
Firewater storage tanks
Firefighting Pumping equipment
Water distribution system
Foam distribution system
Mobile and Fixed Firefighting
The Heating System works include the followings:
Two thermal fluid boilers complete with two fuel burners (using LPG fuel for start-up and preheating and Heavy Fuel Oil for normal operation).
The Waste Water Collection System works include the followings:
HFO slop tank with external heat tracing and Insulation.
Light Products slop tank.
Slop pumps.
HFO slop piping system.
Light
The Pump Installation works include the followings:
Heavy Products Screw pumps
Light Products Centrifugal pumps
Off spec Products Centrifugal pumps
Grouting of pump pockets and base frame
The Jetty Piping works include the followings:
HFO Products pipelines with skin effect heat tracing, PUR coating and HDPE wrapping for buried piping.
HFO Products pipelines with skin effect
Maintenance and service
In addition to our first-class products, we offer a first-class maintenance and repair service which is done by our experienced in-house employees. We check your
Spare parts for pumps
Before the commissioning of your pump or system, we develop a logistics concept for pump spare parts. Thus, we enable a fast worldwide delivery even of rare spare
DASHPROJECTS Valve Check: Inspection Service for Pressure Relief Valves
Ensure maximum process reliability with the DASHPROJECTS Valve Check* : We check your pressure relief valves and
How does a diaphragm metering pump actually work? How does one mount a drive unit? What should you consider when maintaining a LEWA odorizing system?
The better the user is informed and
DASHPROJECTS pumps have an extremely long life. Therefore, you can easily rely on a DASHPROJECTS 2ndmarket pump for short-term tasks. The high DASHPROJECTS quality is still guaranteed.
Orange showroom – augmented reality app displays 3D pump models.
Illustrating processes in an understandable way, explaining them and experiencing them up close: DASHPROJECTS has
The MWP is a revolutionary turnkey solution provided by DASHPROJECTS enabling the operator to adopt a standardized approach to wellsite surface completion. MWP units can be built for
The Chemical Injection Package serves the purpose of injecting a precise and accurate amount of chemicals into a system with the required back pressure, either continuously or
DASHPROJECTS is a pioneer with a proven track record in engineering, manufacturing and commissioning of Single-Well, Multi-Well, Integrated RTU/PLC-based, SOLAR-powered Wellhead Control
The High Integrity Protection System designed by Petronash is integrated onto the process package to prevent over-pressurization of the flow line . The HIPS will shut off the
Pressure surge can occur in Pipelines resulting in higher pressure, causing severe damages and ruptures to the installation. Events that causes pressure surge typically occurs
With the Multiport Selector Valve skids, it is possible to receive the flow from five or more oil or gas wells. It consists in one steel body with five or more incoming flow
Engineered Lube Oil system provides pressurized lubrication and protection to various types of industrial rotating equipment such as turbines, compressors, high pressure
Specializing in engineered flow solutions for process and custody transfer applications, we design, manufacture and commission complete flow metering systems for liquid and gas