Construction inspection

Construction inspection

Lifting Equipment Inspection

Lifting Equipment

Lifting equipment is any machine/device, whether powered, manually, mechanically or electrically, able to move, either vertically or horizontally or both, or suspend loads, including the supporting structures and related parts used for lifting and lowering loads. DASH  is competent to carry out initial approval, design review, inspection of manufacturing process and initial inspection, periodic inspection and major inspection (design review to the extent major repairs which affect the total system, repair inspection, visual inspection, functional test and proof load test). The inspection, testing and certification standards are BS 7212, BS 7121, BS EN 1808, BS EN 115-1+A1, BS EN 81-1+A3, BS 5639, BS ISO 22915-8, BS 3726, BS EN 280, BS 8460, BS EN 13157+A1, ISO 4308-1, BS EN 81-2, BS EN 60204, IEC 529, IEC 60947-5-1, LOLER and relevant standard(s).



Inspection, Testing, and Certification – Vehicle Lifts/Car Lifts (TwoPost, Four PostScissoror Lift, & Pit lift)



Inspection, Testing and Certification – Cranes (tower, jib, mobile crane, truck mounted crane, overhead cranes, and their supporting runways)



   Inspection, Testing, and Certification – Pedestal Crane, Hoist



   Inspection, Testing, and Certification – Wall/Pillar Cranes, Derricks, Swing Jibs and Davits



   Inspection, Testing, and Certification- Winches, Hoists (air and electric), Crabs, Chain Blocks, Lever Hoists, Jaw Winches


   Inspection, Testing, and Certification – Pull Lifts, Trolleys, Dozers, BOBCAT, Trolley Jack, Pellet Trucks, Man Lifts, Window Cradles, Escalators & Elevators



   Inspection, Testing, and Certification – Self-loader, Side Beam



   Inspection, Testing, and Certification Powered Working Platform/ Mobile Elevated Working Platform(MEWP) including not limited to Man Lift



   Inspection, Testing, and Certification – Suspended Man Basket



   Inspection, Testing, and Certification – Engine Lifting Jacks, Material Lifts



   Inspection, Testing, and Certification – Lifting Jack (pneumatic and hydraulic)



   Inspection, Testing, and Certification – Chain block, Pulley, Mobile or Movable Jack



   Inspection, Testing and Certification – Calibration of test weight(s) and issuance of certificate



   Inspection, Testing, and Certification – Derrick, Barges, Life Boat Davits Systems, Offshore/ Land Rigs, and Vessels

One thought on “Lifting Equipment Inspection”
Pingback: Check All The Equipment On Site Before Construction – Dash inspectorate Inspection services


Building,Villa,Commerical and Residential Establishment Inspection   DASH is pleased to offer you our best quotation for Third Party Inspection as mentioned below. We believe our response is
Whether you own or operate cranes, lifting or hoisting equipment, you need to ensure that they are safe, and in compliance with statutory requirements. That is where our crane, hoisting and lifting
SCAFFOLDING INSPECTION AND TRAININGWhen should scaffolding be inspected?The Work at Height Regulation Act of 2005 requires that any scaffolding that has been erected must be inspected before it is

Need help or have a question?